Trade Waste Tanks.  
Acid neutralising tank.
Cooling & Straining tank.
Food & Oil interceptor.
Grease trap.

Mixing tank.
Paint settling tank.
Petrol & Oil interceptor.

Plastic tank gallery.
Pump tank.

Settling tank.
Solvent & Oil interceptor.
Trade waste tank.
Triple interceptor.

Silt pit.
Silt trap.

Grease trap Triple interceptor Trade waste tank
Settling tank Silt pit Settling tank
Small grease trap Oil interceptor Cooling and straining tank
Slit Trap Mixing Tank Above Ground Acid neutralising tank
HOME CONTACT

Trade waste tanks from Viking Plastics. 

Contaminated trade waste is water that has been contaminated in the process of normal business practices that cannot be returned to the environment safely without being  treated.
Contaminated trade waste may contain chemicals, fats or detergents or other harmful products.
Contaminated trade waste is typically wastewater from food preparation areas or as a result of any washing, cleaning or rinsing process using products that may be harful to the  enviroment.


Above Ground installations

250lt Grease Trap

600lt Grease Trap

2000lt Grease Trap

 

Trade waste tanks trap and retain grease, fat, oil, silt, sand, sludge and other substances to prevent their entry into the sewerage system.
Trade waste tanks vary in design according to their application.

  • Manufactured from PVC and Polypropylene materials, this tank is suitable for above-ground installations only
  • Standard tanks are fitted with 100mm nb. Inlet and Outlet pipe and 50mm Vent
  • Cirular screw-down access covers are fitted to a top lid that is screw fixed to the tank flange
  • Tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
  • When space limitations dictate, equivalent capacity tanks can be manufactured to order
  • *Note: Tanks larger than 250 litres capacity have external bracing fitted. Allow 50mm all round

Downloads

  • Trade waste tanks above ground installation guidelines
  • Below Ground installations

    1000lt Grease Trap & Cover


    • Manufactured from PVC and Polypropylene materials, this tank is suitable for below-ground installations
    • The tank must be surrounded with 100mm thick concrete walls and base
    • Standard tanks are fitted with 100mm nb. Inlet, Outlet and Vent pipes
    • Access covers (supplied separately) capable of being removed by one man should be fitted on top
    • Tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
    • When space limitations dictate, equivalent capacity tanks can be manufactured to order

    Downloads

  • Trade waste tanks below ground installation guidelines
  •  

    Copyright © Viking Plastics Engineering Pty Ltd | All Rights Reserved

    Email: info@vikingplastics.com.au Ph: (03) 9587 2297
    Viking Plastics Engineering Pty Ltd. website.
     Viking Plastics Engineering Pty Ltd 143 Woodlands Drive, Braeside, Victoria, 3195

    Contact Us