Food and Oil triple interceptors.                   
Acid neutralising tank.
Cooling & Straining tank.
Food & Oil interceptor.
Grease trap.

Mixing tank.
Paint settling tank.
Petrol & Oil interceptor.

Plastic tank gallery.
Pump tank.

Settling tank.
Solvent & Oil interceptor.
Trade waste tank.
Triple interceptor.

Silt pit.
Silt trap.

Grease trap Triple interceptor Trade waste tank
Settling tank Silt pit Settling tank
Small grease trap Oil interceptor Cooling and straining tank
Slit Trap Mixing Tank Above Ground Acid neutralising tank
HOME CONTACT
Triple interceptor tanks for food and oil
from Plastic Tanks Australia.

Triple interceptors are required in commercial food preparation areas.

The function of a triple interceptor is to slow the flow of Warm/hot greasy water thus allowing it to cool.
As the water cools, the grease and oil separate and float to the top, solids to settle on the bottom of the triple interceptor tank and the cleaner/cooler water flows out to sewer.

Above Ground Triple interceptors

250lt Grease Trap

600lt Grease Trap

 

2000lt Grease Trap

 

 

 

 

VP9-2

  • Manufactured from PVC and Polypropylene materials, this triple interceptor tank is suitable for above-ground installations only
  • Standard triple interceptor tanks are fitted with 100mm nb. Inlet and Outlet pipe and 50mm Vent
  • Cirular screw-down access covers are fitted to a top lid that is screw fixed to the tank flange
  • Triple interceptor tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
  • When space limitations dictate, equivalent capacity triple interceptor tanks can be manufactured to order
  • *Note: Triple interceptor tanks larger than 250 litres capacity have external bracing fitted. Allow 50mm all round

 Downloads

  • Triple Interceptor Above Ground.

  • Below Ground Triple interceptors

    1000lt Grease Trap & Cover (cover sold separately)

    1000lt Grease Trap & Cover

     

     

     

     


    VP9-1

    • Manufactured from PVC and Polypropylene materials, this triple interceptor tank is suitable for below-ground installations
    • The triple interceptor tank must be surrounded with 100mm thick concrete walls and base
    • Standard triple interceptor tanks are fitted with 100mm nb. Inlet, Outlet and Vent pipes
    • Access covers (supplied separately) capable of being removed by one man should be fitted on top
    • Triple interceptor tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
    • When space limitations dictate, equivalent capacity triple interceptor tanks can be manufactured to order

    Downloads

  • Triple Interceptor Below Ground.
  • Copyright © Viking Plastics Pty. Ltd. | All Rights Reserved

    Email: info@vikingplastics.com.au Ph: (03) 9587 2297
    Another Viking Plastics Pty. Ltd. website.
     
    Viking Plastics Pty. Ltd. 143 Woodlands Drive, Braeside, Victoria, 3195

    Contact Us